mirror stainless steel sheet suppliers

        "Mirror surface" refers to the surface condition of stainless steel. The stainless steel raw material is polished on the surface of the stainless steel plate with the polishing equipment through the polishing equipment, so that the surface of the plate is as clear as a mirror. Common stainless steel mirror panels are divided into three types: 6K, 8K, and 10K. Generally it is ordinary polishing, ordinary 8K, fine grinding 8K, 10K. The higher the value, the higher the reflectivity, the higher the brightness, the better the surface quality, and the fewer or no grinding heads.

        Stainless steel mirror panels are used in a wide range of applications, such as architectural decoration, interior decoration, office decoration, elevator decoration, industrial decoration, equipment decoration and other fields of decoration, decoration, and decoration. It should be that the stability and hardness of the stainless steel material itself are relatively high. For example, the elevators we often see are products made of this stainless steel mirror panel. This type of mirror panel is not only strong and durable, but also the effect of the mirror surface is maintained for a long time, and there is generally no non-artificial natural wear.


        The process of stainless steel mirror panel processing can be divided into two methods: normal grinding and fine grinding. Which of these two processing methods produces a better mirror effect? And this must be judged by looking at the brightness of the mirror surface, and the blisters and grinding heads on the surface of the plate must be less. Generally speaking, stainless steel plates are processed on a polishing machine. The slower the traveling speed, the more the number of grinding groups, and this effect will be very good; when stainless steel plates are processed by polishing equipment, the first thing to do is to The plate is sanded, and then the stainless steel plate is put into the grinding fluid, which needs to be ground through 8 groups of grinding heads with different thicknesses. The grinding process is basically the surface treatment of the stainless steel plate. There is no depth in this process. This step is mainly for Remove the oxide layer on the surface of the stainless steel plate.

 

 



Related Products


Contact Us

Name:

Subject:

Email*:

Message*: