1/2 inch stainless steel pipe fittings
Pipe fittings including flanges, elbows, tees, ball valves, valves, ferrules, fittings and so on.And there are 200/300/400 etc series in stainless steel.
Elbow In the piping system, the elbow is a pipe that changes the direction of the pipe. According to the angle, there are three most commonly used 45° and 90°180°, and other abnormal angle elbows such as 60° are also included according to engineering needs. Elbows are made of cast iron, stainless steel, alloy steel, malleable iron, carbon steel, non-ferrous metals and plastics. The way to connect to the pipe is: direct welding (the most common way) flange connection, hot melt connection, fused connection, threaded connection and socket connection. According to the production process, it can be divided into: welding elbow, punching elbow, push elbow, casting elbow, butt weld elbow. Other names: 90 degree elbow, right angle bend, love and bend.
Flanges are disc-shaped parts that are most common in pipeline engineering. The flanges are used in pairs and with the matching flanges on the valve. In plumbing, flanges are primarily used for pipe connections. In the pipelines that need to be connected, a variety of flanges are installed. The low-pressure pipelines can use wire-bonded flanges, and the welding flanges are used at pressures above 4 kg. A gasket is placed between the two flanges and then bolted. Different pressure flanges have different thicknesses and use different bolts.
A stainless steel tee is a type of pipe used at the branch of a pipe. For the production of tees using seamless pipes, the processes currently used are hydraulic bulging and hot forming. The hydraulic bulging of the stainless steel tee is a forming process for expanding the branch pipe by axial compensation of the metal material. The process is to use a special hydraulic machine to inject liquid into the tube blank with the same diameter of the three-way, and to simultaneously press the two horizontal side cylinders of the hydraulic machine to press the tube blank, the volume of the tube blank becomes smaller, and the tube blank is compressed. The liquid becomes smaller as the volume of the tube blank becomes smaller, and when the pressure required for the expansion of the stainless steel tee branch pipe is reached, the metal material flows along the cavity of the mold and swells out of the branch pipe under the double action of the liquid pressure in the side cylinder and the tube blank.
Requirements for any stainless steel pipe fittings please feel free to contact with Jaway Steel,the original and professional manufacturer in SS pipe fittings over 20 years,very expect and welcome your valuable inquiry.
Contact sales:Ms.Joly Tang.
Email address:808@jawaysteel.com
Related Products
