Stainless steel wire
Jawaysteel co.,ltd specialized in stainless steel wire since 1998.Stainless steel wire drawing (stainless steel wire drawing) under the action of drawing force, the wire rod or wire billets from wire drawing die die out, in order to produce small section steel wire or metal plasticity processing non-ferrous metal wire. All kinds of metals and alloys of different cross section shape and size of metal Si Dou can use drawing production. Pull out silk, precise size, smooth surface, and drawing equipment and mold used,Is usually based on the austenite and ferrite, two-way and martensite stainless steel, stainless steel mainly divides into two department, three, four, five and six series of stainless steel.
The performance of the 316 and 317 stainless steel (317 stainless steel see after) is molybdenum stainless steel.The molybdenum content of 317 stainless steel was a little bit clever than 316 stainless steel. Because of molybdenum in steel,stainless steel, the steel grade overall performance is better than 310 and 304, under the condition of high temperature when the concentration of sulfuric acid is less than 15% and higher than 85%, the 316 stainless steel has a wide range of USES.316 stainless steel has good resistance to chloride erosion performance, so it is usually used in the Marine environment.316 l stainless steel 0.03, the biggest carbon content can be used for welding cannot undertake after annealing and maximum use of corrosion resistance.
Bellow are main grade, any inquiry about stainless steel wire,advise freely.
AISI Grade |
Chemical composition(%) |
|||||||||
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Mo |
Cu |
Ti |
|
304 |
<0.08 |
<1.0 |
<2.0 |
<0.035 |
<0.03 |
8~10 |
17~19 |
- |
- |
- |
304L |
<0.03 |
<1.0 |
<2.0 |
<0.04 |
<0.03 |
9~13 |
18~20 |
- |
- |
- |
304HC |
<0.06 |
<1.0 |
1.2-1.8 |
<0.035 |
<0.03 |
8~11 |
17~19 |
- |
2.0-3.0 |
- |
316 |
<0.08 |
<1.0 |
<2.0 |
<0.04 |
<0.03 |
10~14 |
16~18 |
2.0~3.0 |
- |
- |
316L |
<0.03 |
<1.0 |
<2.0 |
<0.04 |
<0.03 |
12~15 |
16~18 |
2.0~3.0 |
- |
- |
310S |
<0.08 |
<1.5 |
<2.0 |
<0.04 |
<0.03 |
19~22 |
24~26 |
- |
- |
- |
321 |
<0.08 |
<1.0 |
<2.0 |
<0.045 |
<0.03 |
9~13 |
17~19 |
- |
- |
>0.035 |
301 |
<0.15 |
<1.0 |
<2.0 |
<0.04 |
<0.03 |
>7 |
16~18 |
- |
- |
- |
302 |
<0.15 |
<1.0 |
<2.0 |
<0.04 |
<0.03 |
>8 |
17~19 |
- |
- |
- |
Related Products