China 201 stainless steel rods for export

China 201 stainless steel rods for export  

201 stainless steel material has certain acid resistance, alkali resistance, high density, polishing, no bubbles, no pinhole and other characteristics, is the production of a variety of case, watchband bottom cover of high-quality materials. Mainly used as decorative tubes, industrial tubes, products of some shallow drawing.

For the 201 stainless steel rods,Chinese mainly has the following several 200 Series: J1, J3, J4201202. steel later appeared on the lower nickel content of the 200 steels, as 201C, is in the late Chinese individual steel developed 201 extension steel, 201 of the national standard is: 1Cr17Mn6Ni5N, 201C continue to reduce the nickel content on the basis of 201 on the increase of manganese content.

201 stainless steel rods, widely used in hardware, machinery, petroleum, chemical, shipbuilding, marine engineering, boiler, heat exchanger, aerospace, environmental protection, high temperature resistance, corrosion resistance, low temperature refrigeration, automotive, pharmaceutical, food, electricity, water conservancy, construction, urea, nuclear power industry, new energy equipment, by the user of all ages.

The chemical composition and mechanical properties is in the following

1) 201 C: ≤0.15 Si: ≤1.00 Mn: 5.50~7.50 P: ≤0.060 S: ≤0.030 Ni: 3.50~ 5.50 Cr: 16.00~18.00 N: ≤0.25

2)Tensile strength: 520MPa
Yield strength: 275MPa
Elongation: 55 to 60%
Elastic modulus: 29000000 psi reduced to: 203000MPa
Hardness requirements (hardness) HRB<183N/mm2 (MPa).
Density: inch.280lbs/cubic (density 7.93g/cm3)

The above information of 201 stainless steel rod from manufacturer in China,if any interests please feel free to contact us.

Related Products

Contact Us