3mm stainless steel wire

  Stainless Steel Wire is spring tempered and made from full hard, 300 series stainless steel. Excellent corrosion resistant qualities and smooth finish. Applications include springs, wire forms, control linkages, armature binding, ceramic cutting, and a variety of industrial uses.

  3mm stainless steel wire is divided according to the chemical composition. From the above characteristics, 200 stainless steel has high strength, obvious work hardening effect, and good wear resistance, so it can make full use of its characteristics during use.

  Material, which is also Grade, es below: 201,202,202Cu,304,304L,310S,310,309,309S,316,316L,316Ti,317,317L,321,321H,347,347H,302,301,403,405,409,409L,410,410S,420,430,631,904L,Duplex,etc

  Comparing the chemical composition of several typical 200 series stainless steels, we can see that from the aspect of C content: one type has a C content of 0.10% or more. Due to the large amount of Mn added to the steel, the nickel content in the steel is greatly reduced, usually only 2 to 6%, which largely saves the amount of nickel added.

  One type has a C content of 0.10% or more; the other type has a relatively low C content, which may affect its wear resistance. Process costs increase; excellent wear resistance; poor bending and cold upset properties; and the traditional 200 series steel, which is sensitive to intergranular corrosion, and the addition of stabilizing elements cannot change its sensitivity.

  3mm stainless steel wire has the following characteristics: the tensile strength after solution treatment is high, generally 800~1500 MPa, and the tensile strength cannot be lowered; the cold work hardening rate rises sharply, the cold working strengthening coefficient K>15, and the processing is difficult.

  Quality advantage:

  1) high-grade carbon steel material warranted

  2) advanced production devices and experienced worker

  3) it can be used for crane lifting, fishing industry, protection devices, decorations, etc.

  4) standard : ISO, BS, DIN, JIS, ASTIM, etc .

  5) diameter from 0.1mm------20mm


  If you have confirm requirement on stainless steel wire,please contact Email:818@jawaysteel.com

Related Products

Contact Us