304 Cold Rolled Stainless Steel Sheet
304 cold rolled stainless steel sheet is a process of rolling hot-rolled coils at room temperature below recrystallization temperature. Cold-rolled steel sheets are steel sheets produced by cold rolling process, referred to as cold sheets.
The thickness of cold-rolled sheets is generally between 0.1 and 8.0 mm. The thickness of cold-rolled sheets produced in most factories is below 4.5 mm.
The thickness and width of cold-rolled sheets are determined by the equipment capacity and market demand of each factory.
304 Cold-rolled stainless steel sheet and strips are widely used in the filed like automobile manufacturing, electrical products, locomotives and vehicles, aviation, precision instruments, canned food, etc.
304 Cold rolled stainless steel sheet is the abbreviation of common carbon structural steel cold-rolled sheet, also known as cold-rolled sheet, commonly known as cold-rolled sheet, sometimes miswritten as cold-rolled sheet.
The cold plate is a hot rolled strip of common carbon structural steel.
After further cold rolling, the cold plate with thickness less than 4 mm is made. Because there is no oxide scale produced during rolling at room temperature, the surface quality of cold plate is good and the dimension accuracy is high.
In addition to annealing treatment, the mechanical and technological properties of cold plate are superior to those of hot rolled thin plate.
It has been gradually replaced by hot rolled thin plate in many fields, especially in the field of household appliances manufacturing.
The chemical composition of 304 Cold-rolled stainless steel sheet:
C: ≤0.07
Mn: ≤2.00
P: ≤0.045
S: ≤0.030
Si: ≤0.75
Cr: 17.5–19.5
Ni: 8.0–10.5
N: ≤0.10
Jaway Steel is an original manufacturer specializes for stainless steel, hot dip galvanized steel, steel and alloy steel plate, sheet, bar, tube etc.
If you need more details about our 304 Cold-rolled stainless steel sheet or the latest price, please contact us freely: 825@jawaysteel.com.
Related Products