What is 15CDV6 Alloy?
Alloy 15CDV6 is a low carbon steel which combines a high yield strength (superior to SAE 4130) with good toughness and weld ability. 15CDV6 can be readily welded with very little loss of properties during welding and without the need for further heat treatment. This alloy finds many applications in the aerospace and motorsports industries in such components as roll cages, pressure vessels, suspensions, rocket motor casings, wish bones and sub frames.
Wide range of applications:
Roll cages
Pressure vessels
Rocket motor casings
Subframes
Track and push rods
Wishbones
Uprights
Suspension components
Motorsport applications
Typical Mechanical Properties
|
Alloy |
Condition |
Tensile Strength MPa |
Yield Strength MPa |
Elongation % |
Hardness HB |
|
Alloy 15CDV6 |
1.7734.2 (ann) |
--- |
--- |
-- |
197 |
|
Alloy 15CDV6 |
1.7734.4 |
700 |
550 |
13 |
207 |
|
Alloy 15CDV6 |
1.7734.5 |
980-1180 |
790 |
11 |
293-352 |
|
Alloy 15CDV6 |
1.7734.6 |
1080-1250 |
930 |
10 |
321-363 |
Alloy 15CDV6 round bar available size:
20mm 25mm 30mm 35mm 40mm 45mm 50mm 60mm 95mm 100mm 160mm
Alloy 15CDV6 pipe available size:
12*1.0mm/12*1.5mm/12*2.0mm 30*1.0mm/30*1.5mm/30*2.0mm/30*3.0mm
14*1.0mm/14*1.5mm/14*2.0mm 32*1.0mm/32*1.5mm/32*2.0mm
16*1.0mm/16*1.5mm/16*2.0mm 35*1.0mm/35*1.5mm/36*1.0mm
18*1.0mm/18*1.5mm/18*2.0mm 40*1.0mm/40*1.5mm/40*2.0mm/40*3.0mm
20*1.0mm/20*1.5mm/20*2.0mm 45*1.5mm/45*3.0mm
22*1.0mm/22*1.5mm/22*2.0mm 50*1.5mm/50*3.2mm
25*1.0mm/25*1.5mm/25*2.0mm/2.5*2.5mm 55*1.5mm
28*1.0mm/28*1.5mm/28*2.0mm 64*2.0mm
If you have any new enquiry about Alloy 15CDV6 plz feel free to contact us!
Related Products
Factory Introduction
Choose the right stainless steel material according to your needs
316N Stainless Steel