Type of Steel Bars
Generally there are two types of steel bars available in the market.
1. Mild steel bars
2. Deformed steel bars
Mild steel bars (as per IS: 432, part-I -1982)
Mild steel bars are used for tensile stress of RCC (Reinforced cement concrete) slab beams etc. in reinfo
rced cement concrete work. These steel bars are plain in surface and are round sections of diameter fro
m 6 to 50 mm. These rods are manufactured in long lengths and can be cut quickly and be bent easily
without damage.
Deformed steel bars (as per IS: 1786-1985)
As deformed bars are rods of steels provided with lugs, ribs or deformation on the surface of bar, these
bars minimize slippage in concrete and increases the bond between the two materials. Deformed bars h
ave more tensile stresses than that of mild steel plain bars. These bars can be used without end hooks.
The deformation should be spaced along the bar at substantially uniform distances.
To limit cracks that may develop in reinforced concrete around mild steel bars due to stretching of bars
and some lose of bond under load it is common to use deformed bars that have projecting ribs or are tw
isted to improve the bond with concrete. These bars are produced in sections from 6 mm to 50 mm dia.
In addition the strength of bonds of deformed bars calculated should be 40 to 80 % higher than that of
plain round bars of same nominal size. And it has more tensile stress than that of plain round bars of sa
me nominal size.
Cold twisted deformed (Ribbed or Tor Steel Bars) bars are recommended as best quality steel bars for c
onstruction work by structural Engineer.
Various Grades of Mild Steel Bars
Reinforcement bars in accordance with standard IS No. 432 part-
I can be classified into following types.
1) Mild Steel Bars: Mild steel bars can be supplied in two grades
a) Mild steel bars grade-I designated as Fe 410-S or Grade 60
b) Mild steel bars grade-II designated as Fe-410-o or Grade 40
2) Medium Tensile Steel Bars designated as Fe- 540-w-ht or Grade 75.
Related Products