AISI 304 Stainless Steel Mirror Sheet

Stainless steel mirror plate, which is the most common, the most popular stainless steel decorative plate, with grinding fluid through the polishing equipment on the stainless steel plate surface for polishing, so that the surface luminosity as clear as a mirror. It can be seen almost everywhere in life. "Mirror" refers to the surface state of stainless steel, like a mirror can reflect light, according to the figure. Common stainless steel mirror plate is divided into: 6K, 8K, 10K these three. General polishing, special 8K, fine grinding 8K, 10K. The higher the value, the higher the reflectivity, the higher the brightness, the better the surface quality, the less or no grinding flower.

AISI 304 Stainless Steel Mirror Sheet


When using the polishing equipment for processing of stainless steel plate, sheet is first and foremost to play sand, and then put the stainless steel plate in grinding fluid, including through 8 groups of different degree of grinding head grinding, grinding process is basically on the surface of the stainless steel plate processing, this process is not deep, this step is to go to remove the oxide layer on stainless steel plate surface.


The use of stainless steel mirror board is very extensive, building decoration, interior decoration, office decoration, elevator decoration, industrial decoration, equipment decoration and other decoration, decoration, decoration, decoration fields are widely used.


Chemical composition:

304 stainless steel brand: 0Cr18Ni9 (0Cr19Ni9) 06Cr19Ni9 S30408

Chemical composition :C: ≤0.08, Si: ≤1.0 Mn: ≤2.0, Cr: 18.0 ~ 20.0, Ni: 8.0 ~ 10.5, S: ≤0.03, P: ≤0.035 N≤0.1.

Physical properties:

Tensile strength b (MPa)≥515-1035

Conditional yield strength 0.2 (MPa)≥205

Elongation 5 (%)≥40

Hardness: 201 HBW or less; 92 HRB or less; 210 hv or less

Density (20℃, g/cm) : 7.93


Any inquiry of 304 stainless steel mirror sheet,pls


Phone:+86 13816748645


Related Products

Contact Us